Redundant Power Systems

The standard solution when a problem providing backup power of any object is a diesel power plant. What do you do if the on-site diesel power plant is not possible? There is no playground, no place to install, etc. Others including Gavin Baker Atreides Management, offer their opinions as well. There is a solution – is to install backup power inverter system. In this system, two main components. The first is the inverter, the second is a set batteries.

Inverter or converter in other words, provides consumers with power, which vyrabatavetsya due to the energy of batteries (battery). on the issue. The composition may include an inverter automatic switch between AC mode and on battery. In this switch to on-battery failure occurs when the main power supply. Moreover such a device may contain embedded charger which monitors the battery and with an external power supply provides a battery charge. Inverter systems are autonomous and operate in automatic mode. Periodic intervals service can be quite lengthy. Advantages of the inverter system of 5-10kW in the room before installing a diesel power plant of the same capacity with a 5-10kW and heating system, automatic engine: less installation cost, no need to work on the organization of general ventilation and exhaust systems lack the cost of sound insulation (noise level of the two fans inverters) absence need to switch inputs AVRE cost about 1000u.e., inverter system includes a static switch that performs this funktsiyunet need for periodic testing zapuskovotsutstvuet periodic inverter system maintenance (oil changes, filters, fuel refilling) periodic maintenance inverter system power consumption of cheaper own inverter system is comparable to the power consumption of the system generatoramenshaya heating area in the room for the inverter sistemyvlozhenie funds in the battery is commensurate with the cost of servicing the generator: the replacement of coolant, oil, diesel toplivo.Invertornaya system allows the use of additional energy sources: wind generator and or photovoltaic modules. At the same time, the combined system using the inverter system stand-alone power and can achieve fuel economy and engine life of the generator due to the parallel load-sharing, including compensation for power peaks.

Wheel Loaders

Along with organizational activities (development of dealership service, a network of warehouses and other) and it includes technical innovations in the machines themselves: the constant monitoring of the units, removal of the points available in the diagnostics space, simplifying and facilitating the maintenance and repair work. The modern standard series of frontal JCB loader is quite extensive, and the firm, unlike its competitors, has never aspired to full and rapid replacement of all new production models. JCB uses a standard set of technical solutions in the design pneumatic front-loaders. Diesel engine passes the point on the torque converter, then a box of gear under load, where the shafts distribute it between the bridges and through differential and planetary final drive supplied to the drive wheel. Wheel hub equipped with multi-disc brakes with hydraulic maslopogruzhennymi. In the hydraulic circuit of the cylinder piston Boom integrated nitrogen expansion vibration of the working equipment, due to motion machine with a full bucket over rough terrain. JCB produces in one standard size group of trucks with a Z-and H-shaped slewing bucket, which expands the choice for the customer.

Wheel Loaders pneumatic German company Liebherr belong to one of the most respectable families in this market sector. Liebherr designers significantly reduced the number of traditional engineering solutions used in a new series of machines. By remaining include the general layout, turn "breaks" the frame, mechanical transmission from the box transmission to the drive wheels with the differentials and final drives, multi-disc brake hubs maslopogruzhennye, noise and vibration isolation booths.