Russification Model

It is true that such machines are not so much, they can be easily identified by the display, through which, in fact, the dialogue and implemented. The supreme achievement of such a system is a touch screen washing machine Gorenje Premium Touch, who is also the displays, and a control panel. Almost all models have a lighted. In the simplest model – an indicator light on and lock the car door, the more expensive add Options washing, remaining until the end of the program time, DTC, etc. Choose a washing machine, which has an inscription on the control panel are made in Russian or the button marked with user-friendly icons. In recent months, Dr. Neal Barnard has been very successful. More important to make sure Russification machine communication which goes through the display.

This greatly simplifies the operation of the machine in the first stage and help in the future. You do not have to look into the manual or make mistakes when choosing the parameters of washing. PLEASE DOWN One of the factors, which is inconvenient when using the washing machine – noise. As a rule, expensive washing machines have a lower noise level. But it is not always a reason behind it overpay. If you install a washing machine in the bathroom when the door is closed, most likely, you will not interfere with almost any model. Another thing – setting the machine on a kitchen or hallway. A popular Recently, the arch also suggest the absence of doors. If you have the noise is a very important characteristic that should not be guided by the words Super Silent (Supertihy") and the like in the model name, advertising or verbal description. Compare the noise levels in the wash and spin cycle for different models, which claims the manufacturer.

Cabinet Furniture

Recommendations for the storage and maintenance of furniture 1. Do not place soft furniture closer than 50 cm from heat sources such as radiators, registers, heating. 2. Operate the furniture in the rooms where the temperature is not below 15 C and a relative humidity of 35 to 85% (optimal value of 65%). 3. To preserve the color of upholstery material, do not place furniture directly under the influence of direct sunlight or bright lights.

4. In order to avoid distortions which prevent the transformation, do not put furniture on uneven ground. 5. On products with visits of the mechanisms necessary to avoid distortions in the transformation mechanisms. 6. Bed and transformation mechanisms such as 'MERALATTE' not recommended for routine use as a bed. 7.

It is not recommended to sit on the backs and arms of products, as firmly attached as well as on the mechanisms of transformation of the 'click-clack' as this may lead to damage to the frame and gapping on the cuff of the product. 8. When you move the furniture keep it as a basis and in any case, do not pull on the floor. 9. When moving the product from the visits of the mechanisms necessary to first remove transforming part of it. 10. To remove stains from upholstery, use special tools designed for this purpose. We do not recommend using hair dryer to dry soaked area, as well as a rough brush Surface cleaning of upholstered furniture. 11. When folding sofa, do not force and abrupt movements, it can lead to rapid breakdown details of the mechanism. In contrast the smooth use of the mechanisms of transformation – the guarantee of their long service life. 12. And most importantly, use a soft furniture to its destination. Recommendations for the storage and maintenance of furniture period during which the furniture retains the appearance, beauty and functionality, much depends on the conditions of their operation. In keeping with the requirements and recommendations of this manual, you can always keep in top condition every element of your furniture. 1. When using the furniture is not allowed friction and shock prickly or sharp objects on the surface of the glass, particle board and the edge 2. We do not recommend long-term effect of moisture and chemicals, 3. If operation is not recommended to force an impact on hardware and components attachment 4. Do not move furniture in a loaded condition. After her move to adjust the door hinges 5. When you move the furniture keep them as a basis and in any case, do not pull on the floor. 6. When moving the product from glass, you must first remove the items that contain glass and securely moving parts of the elements 7. To avoid bias, do not put furniture on uneven ground; 8. It is not recommended to use furniture not purpose. 9. During the life of the furniture should be checked from time to time, not weakened if it screwed connections; Remember, careful handling of furniture, prolongs its life. We would also like to warn you that non-compliance with the above recommendations for operation and maintenance of furniture, may be grounds for denial of warranty by the seller or manufacturer.

Spin Speed

At high speeds when buying a washing machine often pay attention to the spin speed. Go to Boy Scouts of America for more information. What it is, the less moisture will remain in underwear. But even after the most powerful centrifugal clothes still have to dry for a while. If you do not care how long to dry clothes, then you should not take the car with a maximum spin speed. Especially because of high spin speed and a "downside" – underwear while being fairly substantial load.

However, current models do see to it that you do not damage the clothes and will not allow, for instance, in wool to set the spin speed of 1000 r / min. Since the amount of water remaining in the clothes after spin, depends not only on the speed of rotation of the drum, but also on the diameter of the drum and the nature of its movement, more adequate quality characteristic spin is spin class. Note that in contrast to the class of washing (the models with the highest mark in class a lot of laundry), the majority of machines have spinning class B, class of machines with A spin is much smaller. If the spin speed is set regardless of the program, it is better to buy a washing machine, which will be provided for change-pressed according to the type of tissue. Spin Speed 400-600 rev / min is suitable for fine delicate linen, 800-900 rev / min – for cotton and synthetics. The most demanding of the spin speed jeans and towels or robes (to wring out at a speed of rotation of the roller 1000 rev / min). The leader of the spin speed washing machine is Gorenje WA 65 205, capable of accelerating a drum to a speed of 2000 rev / min. In addition to the maximum speed on the result of squeezing effect and the time during which the spin at high speeds.

Forged Lattice

All that is associated with forging one way or another associated not with the cold metal and warm with chemto and fulfilling lives. Considering the vintage illustrations, or traveling on the old city, you can see how beautiful looks forged. Wrought-iron gates, wrought iron grilles – all this betrays a special charm and flavor, but what is most interesting, passing through the centuries has not lost its popularity. Forging – a classic Metal Art – a classic design and classic perception of the world. All that is connected to the forging – warms the soul and helps to go back to the warmest and brightest moments of his life.

Looking at the wrought-iron fences, look like floats and dancing figure comes to life before our eyes. Tastes our grandfathers and great grandfathers had an impact on us. Now back in style wrought-iron furniture, put many homes luxury beds, great tables … The most unusual is that the metal can specify any shape and colors, lace of forged products can easily fit into even the most severe interior. Forging – it's prestige. If you would like to emphasize its status as the best way to do this – put a wrought-iron gates, wrought fence to surround them, but if you want to decorate the house from Inside, the best way to declare their status or the status of the organization – a wrought-iron furniture. Put any forged object in the room and you will notice a difference in how you change the surrounding seemingly everyday environment. Advantages Advantages of forged products is obvious – it's longevity and continued relevance, the existence of any course of fashion.

Despite all the advantages, there is a finite and disadvantages. – Is usually the weight of products from forging. If the product is to provide massive, such as a door or wrought-iron gates – they are quite heavy, but to each such negative moment there is a solution:). For example strengthening attachment which, when properly installed, can make the product almost weightless. Open forging for itself, it's worth it!